How to Refill IVG Smart Max Pods
If you have been searching for how to refill IVG Smart Max pods with your own e-liquid, there is something important to know before you go any further: these are sealed prefilled pods and they are not designed to be opened and topped up manually. That said, the Smart Max does have its own straightforward process for getting fresh e-liquid into the device, and it is worth understanding exactly how it works.
Why the IVG Smart Max Pods Cannot Be Manually Refilled
The IVG Smart Max uses a closed pod system. Each pod comes factory-sealed with 20mg nic salt e-liquid and a built-in coil, and IVG has not designed them to be opened or refilled with third-party liquids. Attempting to force the pod open risks damaging the coil, breaking the seal, and introducing e-liquid into parts of the device it was never meant to reach. Even if you did manage to get liquid inside, the coil is calibrated to work specifically with IVG's own e-liquid formulation, so the performance would likely be inconsistent at best.
If you are after a device that lets you choose your own e-liquid and refill pods manually, a traditional refillable pod kit would be a better fit for your vaping style.
How the IVG Smart Max Refill System Actually Works
Auto-refill systemWhat the IVG Smart Max pods do have is an auto-refill system that handles the e-liquid management for you. Each pod set consists of two components: a 2ml prefilled pod and a 10ml refill container. The 2ml pod is what sits inside the device and delivers vapour when you inhale. The 10ml container attaches to the pod and automatically feeds e-liquid into it as you vape, keeping the coil consistently saturated and reducing dry hits throughout the life of the pod.
The two components are sold together as a single unit in each IVG Smart Max replacement pack. You do not need to buy them separately or do anything to trigger the auto-feed. It works passively as you vape.
How to Change the Pod on the IVG Smart Max
When the 10ml refill container is empty, the pod set needs to be replaced. Here is how to do it:
- Check the LED display. The Smart Max will show a low e-liquid warning when the refill container is running low. This gives you time to prepare a fresh pod set before the current one runs out completely.
- Remove the empty pod set. Pull the used 2ml pod and empty 10ml container out of the device.
- Prepare the new pod set. Take a fresh IVG Smart Max replacement pods pack and click the new 2ml pod into the new 10ml refill container until it seats securely.
- Insert into the device. Slide the new pod set into the top of the Smart Max until it is fully seated.
- Wait a minute before vaping. Give the coil a brief moment to prime with fresh e-liquid before taking your first draw. This helps avoid a harsh initial hit.
- Select your preferred mode. Press the button on the device to confirm whether you want Boost Mode or Eco Mode for your new pod set, then vape as normal.
Getting the Most Out of Each Pod Set
Even though you cannot manually top up the pods, there are a few habits that will help you get the most puffs from each set before needing a replacement.
Keeping the device upright when not in use helps the refill container feed consistently into the pod. Avoid chain vaping for extended periods without short breaks, as this can cause the coil to heat faster than the container can replenish the pod, which leads to a dry or muted flavour before the pod is actually empty. Running the device in Eco Mode rather than Boost Mode also extends the life of each pod set considerably, getting you closer to the full 10,000 puff count.
When flavour starts to taste noticeably weaker or slightly off even with e-liquid still showing on the display, the coil inside the pod has likely reached the end of its useful life. At that point, swapping in a fresh pod set is the right call regardless of how much liquid appears to remain.
Stock Up on IVG Smart Max Pods at Vaping 101
The full range of IVG Smart Max replacement pods is available at Vaping 101 in over 20 flavours, including Blue Raspberry Ice, Mango Peach, Kiwi Passionfruit Guava, Strawberry Ice, and Pink Lemonade. All stock is sourced directly from IVG, and you can browse the complete IVG collection here.
IVG Pro Vape Pod Kit
Quick Comparison
| Product / feature | What it is | Best for | Format | Device detail | Shop |
|---|---|---|---|---|---|
| IVG Smart Max Pods | Sealed prefilled replacement pod set | Replacing empty Smart Max pods | 2ml pod + 10ml refill container | 20mg nic salt | Smart Max pods |
| Auto-refill system | Pod and refill container work together | Hands-free e-liquid feeding | Closed pod system | Up to 10,000 puffs | IVG Smart Max |
| Refillable pods | Traditional refillable pod option | Using your own e-liquid | Manual refill format | Open pod systems | Replacement pods |
| IVG | Full IVG collection | Browsing IVG kits and pods | Kits and pods | IVG range | IVG |
Frequently Asked Questions
No. IVG Smart Max pods are sealed prefilled pods and are not designed to be opened and topped up manually with your own e-liquid.
Each pod set uses a 2ml prefilled pod and a 10ml refill container. The container automatically feeds e-liquid into the pod as you vape, keeping the coil saturated without manual refilling.
Remove the empty pod set, take a fresh IVG Smart Max replacement pods pack, click the new 2ml pod into the new 10ml refill container, insert the set into the device, wait a minute, then vape as normal.
Keep the device upright, avoid excessive chain vaping, and use Eco Mode rather than Boost Mode where possible. These habits help the refill container feed consistently and can get you closer to the full 10,000 puff count.
The full range of IVG Smart Max replacement pods is available at Vaping 101 in over 20 flavours. You can also browse the complete IVG collection.
