Vaporesso XROS 6 Review

The XROS 6 is an evolution of Vaporesso's XROS line with an emphasis on battery life, a revised airflow system and an updated user interface. It keeps the pod format familiar to experienced vapers while introducing a few new hardware and software touches intended to simplify setup and improve day to day use.

XROS 6 - What you get in the box

• Device
• Two pods, one preinstalled and one spare, shown as a 0.6 ohm and 0.8 ohm variant in the sample
• USB Type-C cable
• Manual and fill guide

XROS 6 Design and build

Size, weight and layout

The XROS 6 is broadly similar in footprint to the XROS 5 but feels noticeably heavier. That extra weight is down to a larger internal battery. The device uses a top-mounted magnetic pod, a front screen with selectable themes and a single fire/power button. A vent hole appears on the base for battery venting.

Materials and finish

The unit ships with protective films and a tinted coloured screen. Pods are larger than some earlier XROS pods, and they sit on strong magnets for a positive connection.

Screen, menu and controls

The XROS 6 has a colour display with multiple themes. Navigation is simple: five clicks of the fire button turns the device on. The main menu includes theme selection, power modes and a prime coil setting. There is also a quick draw option which can be enabled or disabled in the settings.

Power mode behaviour is restricted by coil selection. The device does not allow manual wattage adjustment unless a 0.4 ohm coil is fitted. For most coil options, the device manages output automatically via its internal circuitry.

Locking and unlocking is achieved with quick presses of the fire button. The device uses a multi-click pattern for power and lock functions.

Pods, coils and filling

Pods for the XROS 6 use Vaporesso's latest pod design. The sample included a 0.6 ohm pod preinstalled and a spare 0.8 ohm pod. Vaporesso also uses the CORE X3 coil family in this line.

Filling is straightforward. The pod top snaps off, exposing a fill port with a coloured insert. Insert your bottle tip into the red fill port and squeeze until the pod is full. The device detects pod insertion automatically.

Note on pod capacities: retail pods may be offered in different capacities. The sample used had a larger pod, but retail availability varies.

XROS 6 Prime coil feature

One notable software addition is a prime coil function in the menu. According to the on-device instructions, activate prime, wait 60 seconds and press the button for three seconds to stop priming. The function appears to run a timed cycle aimed at preparing the coil and wick before first use. The manual provides the same brief instruction and does not detail the internal process, so the feature should be treated as a timed priming aid rather than a guaranteed method to prevent dry hits.

Airflow and performance

Vaporesso describes a new Venturi airflow system on this model. The change is intended to produce a smoother airflow compared with prior XROS pods. In practice the pod offers a comfortable draw and a vape character consistent with subohm pod devices. Coils in the CORE X3 family are used to deliver the expected performance profile.

Note that wattage control is limited to certain coil choices. If you prefer manual wattage adjustment you will need a coil that the device recognises for that mode.

Battery and charging

The XROS 6 uses a significantly larger battery than the previous generation. Sample units are fitted with an 1800 mAh cell, up from 1500 mAh on the XROS 5. That increase makes the device feel heavier but extends run time substantially.

Charging is by USB Type-C and supports up to 3 amp charging. Use a compatible cable and rated charger to take advantage of the faster input.

XROS 6 Setup quick steps

1. Remove protective films and insert pod until it clicks.
2. Fill the pod via the red fill port. Refit the pod top and allow a moment for liquid to settle.
3. Power on with five clicks of the fire button.
4. Optional: use the prime coil function in the menu, wait the 60 second cycle and cancel if required.
5. Adjust themes or enable quick draw in settings if desired.

Pros and cons

Pros

• Substantially larger battery than the previous generation

• USB Type-C with 3 amp charge support

• New Venturi airflow for a smoother draw

• Easy magnetic pods and simple fill method

• Colour screen with themes and basic menu options

Cons

• Heavier than earlier XROS models due to the larger battery

• Limited manual wattage control unless using a 0.4 ohm coil

• Prime coil feature is a black box function with only a timed instruction in the manual

• Pod capacity and exact retail pod variants may vary

Final thoughts on the XROS 6

The XROS 6 is a pragmatic update that focuses on battery life and user convenience. It keeps the familiar pod workflow while adding a few modern touches: faster charging, a smoother airflow approach and a dedicated prime function. For vapers who prioritise longer run time and a simple setup, the XROS 6 is worth considering. For those who want granular wattage control without swapping coils, confirm coil compatibility before committing.