Geekvape Z Max Sub-Ohm Tank

Description - Geekvape Z Max Sub-Ohm Tank

The Geekvape Z Max Sub Ohm Tank is a dedicated DTL (Direct-To-Lung) sub-ohm tank built for vapers who want high-wattage cloud production and bold, saturated flavour without the leaking problems that plague so many bottom-airflow designs. It carries forward the "Z/Zeus" lineage from Geekvape with a top-to-bottom airflow system, a clean top-fill design, and the M Series mesh coil platform at its core. The UK version holds 2ml, fully TPD-compliant, and sits on a 32mm base that pairs best with larger dual-battery box mods capable of 60-85W output.

This is a tank built for everyday vapers and enthusiasts who are ready to step up from a pod system or starter kit into a proper sub-ohm setup. Order from Vaping 101 and you get fast UK delivery, including next-day options on qualifying orders, with free delivery on all orders over £50.

If you want a leak-resistant sub-ohm tank that combines powerful mesh coil performance with a spill-free fill experience, the Z Max is a well-engineered choice backed by one of the most trusted names in vaping hardware.

Introducing the Geekvape Z Max Tank

Geekvape built the Z Max around a straightforward problem: bottom-airflow tanks leak, and for daily users, that is a real frustration. Wet pockets, e-liquid pooling under the mod, the constant anxiety of laying your device on its side. The Z Max addresses this with a top-to-bottom airflow path that routes air in from the top of the tank and down to the coil, keeping the air inlets completely separated from the e-liquid chamber. There is no direct pathway for liquid to escape through the airflow inlets because the inlets are nowhere near the liquid pool.

Paired with a top-fill system that lets you refill without removing the tank from your mod, and the Geekvape M Series mesh coil platform that moves serious vapour at 60-85W, the Z Max is a coherent, practical piece of sub-ohm hardware. It is not aimed at beginners, it requires a capable mod and high-VG shortfill liquids to perform correctly. But for vapers who know what they want from a DTL setup, it delivers consistently.

Why Choose the Geekvape Z Max Tank?

• Device style: Sub-ohm tank built exclusively for DTL vaping. DTL means you inhale vapour directly into the lungs, producing dense clouds and warm, full flavour rather than the tighter, cigarette-style draw of an MTL (Mouth-To-Lung) device.
• Airflow: Top-to-bottom airflow design. Air enters from the top and travels down to the coil, keeping the air inlets separated from the e-liquid chamber. This is the structural reason the Z Max is significantly less prone to leaking than bottom-airflow tanks.
• Filling: Top-fill design for quick, clean refills without detaching the tank from your mod.
• Coil platform: Geekvape M Series mesh coils only. Important: this tank does not accept older Zeus coils or Z-Series coils from previous Geekvape tanks.
• Connection: Standard 510 connection, compatible with the vast majority of box mods.
• Size: 32mm base diameter. Pairs best with larger dual or triple-battery mods that can seat a 32mm tank comfortably and deliver consistent output in the 60-85W range.
• Mouthpiece: Wide-bore 810 drip tip, designed for the open, unrestricted airflow draw that DTL vaping demands.
• Capacity: 2ml, TPD-compliant for UK sale.
• Target user: Everyday vapers and enthusiasts stepping up to a full sub-ohm setup, or experienced vapers looking for a cleaner, more reliable daily tank.

The top airflow design is the Z Max's most practical advantage for daily use: it removes the most common cause of sub-ohm tank leaking without sacrificing airflow volume or flavour quality.

Compatibility & Performance

Getting the most from this top airflow sub-ohm tank means pairing it correctly. Here is everything you need to know before you order.

Coils

The Geekvape Z Max uses Geekvape M Series mesh coils only. Two are included in the box as standard:

• M 0.14Ω - recommended wattage 60-80W, best for dense cloud production.
• M 0.2Ω - recommended wattage 70-85W, delivers a slightly warmer and firmer vapour.
• Additional M Series options, including 0.15Ω and 0.3Ω variants, are available separately for vapers who want to fine-tune their setup. Browse Geekvape M Series replacement coils when you are ready to restock.

Mod compatibility

Your mod needs to reliably hit 60-85W. Single-battery mods often top out below this range and will not drive the M Series coils properly. A dual-battery box mod is the recommended pairing for consistent performance. Browse our variable wattage mods or box mods to find a suitable match for the 32mm base.

E-liquid

70% VG or higher is strongly recommended. High-VG shortfills wick correctly through the large mesh coil surface at sub-ohm wattages. Thinner 50/50 liquids flood the coil at these temperatures, causing spitting and gurgling. If you are adding a nicotine shot to a shortfill, that will thin the VG ratio slightly, so start with a 70/30 VG/PG base at minimum. Our 50ml and 100ml shortfill ranges are the natural companion for this tank.

Nicotine salt liquids are not suitable here. Nic salts are formulated for low-wattage pod systems, not high-VG sub-ohm tanks running at 60-85W.

Vape style and capacity

The Z Max is a DTL-only tank: high vapour, warm, flavour-dense. The UK version holds 2ml in line with TPD regulations. A spare 2ml glass tube is included in the box. Note that a mod is required separately; the Z Max is a tank only and has no built-in battery.

Matching the Z Max with the right mod wattage and a high-VG shortfill is what separates a genuinely satisfying sub-ohm experience from a frustrating one. Get both right and your coils last longer, your flavour stays clean, and your tank stays dry.

Geekvape Z Max Tank Highlights

The Z Max is built around three priorities: no leaks, big clouds, and a coil platform that delivers on flavour. Here is what sets this leak-resistant vape tank apart from the competition:

• Z-level top airflow system that actively reduces leaking by routing air from the top of the tank down to the coil, keeping inlets away from the liquid chamber entirely.
• Top-fill design for quick, one-handed refills without detaching the tank from your mod.
• Geekvape M Series mesh coil platform with a large coil contact surface for saturated, warm vapour at high wattages.
• Adjustable airflow control ring so you can dial in exactly how open or restricted you want your draw without tools.
• Standard 510 connection for compatibility with the vast majority of box mods on the market.
• Wide-bore 810 drip tip for comfortable, high-volume DTL pulls.
• 2ml TPD-compliant capacity, legal and ready for UK use straight out of the box.

These features work together to produce a sub-ohm tank that is genuinely low-maintenance day to day, without trading off the cloud output or flavour intensity that makes DTL vaping worthwhile.

Box Contents

Everything you need to get started is included in the box:

• 1 x Geekvape Z Max Tank (2ml, TPD-compliant)
• 1 x Geekvape M Series 0.14Ω mesh coil (pre-installed, 60-80W)
• 1 x Geekvape M Series 0.2Ω mesh coil (spare, 70-85W)
• 1 x Spare glass tube (2ml)
• 1 x Spare parts pack
• 1 x 810 drip tip

A box mod and e-liquid are required separately and are not included. For replacement coils once your originals are spent, shop Geekvape M Series coils directly and browse our full shortfill range to pair the right liquid with your setup.

Order the Geekvape Z Max Sub Ohm Tank today from Vaping 101 for fast UK delivery, including next-day options on orders placed before the cutoff. Delivery is free on all orders over £50. We stock the complete Geekvape hardware range alongside M Series replacement coils and a wide selection of high-VG shortfills. All orders are dispatched in discreet packaging, and returns are accepted within 14 days on unused items.